sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 1 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optocoupler, phototransistor output, high reliability, 5300 v rms description the sfh610a and sfh6106 feature a high current transfer ratio, low coupling capacitance and high isolation voltage. these couplers have a gaas infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic dip-4 or smd package. the coupling devices are design ed for signal transmission between two electrically separated circuits. the couplers are end-stackable with 2.54 mm spacing. creepage and clearance distances of > 8.0 mm are achieved with option 6 and option 8. this version complies with iec 60950 (din vde 0805) for reinforced insulation up to an operation voltage of 400 v rms or dc. specifications subject to change. features ? good ctr linearity depending on forward current ? isolation test voltage, 5300 v rms ? high collector emitter voltage, v ceo = 70 v ? low saturation voltage ? fast switching times ? low ctr degradation ? temperature stable ? low coupling capacitance ? end stackable, 0.100" (2.54 mm) spacing ? high common mode interference immunity ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 agency approvals ? ul1577, file no. e52744 system code h or j, double protection ? din en 60747-5-5 (vde 0884) available with option 1 ? csa 93751 ? bsi iec 60950; iec 60065 note ? for additional information on the availa ble options refer to option information. e c a c 1 2 4 3 ordering information sfh610x-#x0##t part number ctr bin package option tape and reel agency certified/package ctr (%) ul, bsi, csa 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500 dip-4 sfh610a-1 sfh610a-2 sfh610a-3 sfh610a-4 sfh610a-5 dip-4, 400 mil sfh610a-1x006 sfh610a-2x006 sfh610a-3x006 sfh610a-4x006 - smd-4 SFH6106-1 sfh6106-2 sfh6106-3 sfh6106-4 sfh6106-5t smd-4, option 7 - - sfh610a-3x007 - - vde, ul, bsi, csa (option 1) 40 to 80 63 to 125 100 to 200 160 to 320 250 to 500 smd-4, 400 mil, option 8 sfh610a-1x018t - - - - 10.16 mm > 0.7 mm 7.62 mm dip-6 option 7 9.27 mm option 8 option 6
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 2 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? stresses in excess of the absolu te maximum ratings can ca use permanent damage to the device. functional operation of the devic e is not implied at these or any other conditions in excess of those give n in the operational sections of this document. exposure to abs olute maximum ratings for extended periods of th e time can adversely affect reliability. (1) refer to reflow profile for soldering conditions for surface mount ed devices (smd). refer to wave profile for soldering conditi ons for through hole devices (dip). note ? minimum and maximum values are testing requirements. typical values are characteristics of the device and are the result of en gineering evaluation. typical values are for information only and are not part of the testing requirements. absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input reverse voltage v r 6v dc forward current i f 60 ma surge forward current t 10 s i fsm 2.5 a power dissi pation p diss 100 mw output collector emitter voltage v ceo 70 v emitter collector voltage v eco 7v collector current i c 50 ma t p 1.0 ms i c 100 ma power dissi pation p diss 150 mw coupler storage temperature range t stg -55 to +150 c ambient temperature range t amb -55 to +100 c soldering temperature (1) max. 10 s, dip soldering distance to seating plane 1.5 mm t sld 260 c electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit input forward voltage i f = 60 ma v f - 1.25 1.65 v reverse current v r = 6 v i r -0.0110a capacitance v r = 0 v, f = 1 mhz c o -13-pf thermal resistance r thja - 750 - k/w output collector emitte r capacitance v ce = 5 v, f = 1 mhz c ce -5.2- pf thermal resistance r thja - 500 - k/w collector emitter leakage current v ce = 10 v sfh610a-1 i ceo - 2 50 na SFH6106-1 i ceo - 2 50 na sfh610a-2 i ceo - 2 50 na sfh6106-2 i ceo - 2 50 na sfh610a-3 i ceo - 5 100 na sfh6106-3 i ceo - 5 100 na sfh610a-4 i ceo - 5 100 na sfh6106-4 i ceo - 5 100 na sfh610a-5 i ceo - 5 100 na sfh6106-5t i ceo - 5 100 na coupler collector emitter sa turation voltage i f = 10 ma, i c = 2.5 ma v cesat - 0.25 0.4 v coupling capaci tance f = 1 mhz c c -0.4- pf
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 3 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 current transfer ratio parameter test condition part symbol min. typ. max. unit i c /i f i f = 10 ma, v ce = 5.0 v sfh610a-1 ctr 40 - 80 % SFH6106-1 ctr 40 - 80 % sfh610a-2 ctr 63 - 125 % sfh6106-2 ctr 63 - 125 % sfh610a-3 ctr 100 - 200 % sfh6106-3 ctr 100 - 200 % sfh610a-4 ctr 160 - 320 % sfh6106-4 ctr 160 - 320 % sfh610a-5 ctr 250 - 500 % sfh6106-5 ctr 250 - 500 % i f = 1 ma, v ce = 5 v sfh610a-1 ctr 13 30 - % SFH6106-1 ctr 13 30 - % sfh610a-2 ctr 22 45 - % sfh6106-2 ctr 22 45 - % sfh610a-3 ctr 34 70 - % sfh6106-3 ctr 34 70 - % sfh610a-4 ctr 56 90 - % sfh6106-4 ctr 56 90 - % switching char acteristics parameter test condition part symbol min. typ. max. unit non-saturated current v cc = 5 v, r l = 75 i f - 10 - ma rise time v cc = 5 v, r l = 75 t r - 2 - s fall time v cc = 5 v, r l = 75 t f - 2 - s turn-on time v cc = 5 v, r l = 75 t on - 3 - s turn-off time v cc = 5 v, r l = 75 t off - 2.3 - s cut-off frequency v cc = 5 v f co - 250 - khz saturated current sfh610a-1 i f -20-ma SFH6106-1 sfh610a-2 i f -10-ma sfh6106-2 sfh610a-3 i f -10-ma sfh6106-3 sfh610a-4 i f -5-ma sfh6106-4 saturated rise time sfh610a-1 t r -2-s SFH6106-1 sfh610a-2 t r -3-s sfh6106-2 sfh610a-3 t r -3-s sfh6106-3 sfh610a-4 t r -4-s sfh6106-4
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 4 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? all values presented are typical values. note ? as per iec 60747-5-5, 7.4.3.8.2, this opto coupler is suitable for saf e electrical insulation only within the safety rating s. compliance with the safety ratings shall be ensured by means of protective circuits. fall time sfh610a-1 t f -11-s SFH6106-1 sfh610a-2 t f -14-s sfh6106-2 sfh610a-3 t f -14-s sfh6106-3 sfh610a-4 t f -15-s sfh6106-4 turn-on time sfh610a-1 t on -3-s SFH6106-1 sfh610a-2 t on -4.2- s sfh6106-2 sfh610a-3 t on -4.2- s sfh6106-3 sfh610a-4 t on -6-s sfh6106-4 turn-off time sfh610a-1 t off -18-s SFH6106-1 sfh610a-2 t off -23-s sfh6106-2 sfh610a-3 t off -23-s sfh6106-3 sfh610a-4 t off -25-s sfh6106-4 safety and insulation ratings parameter test condition symbol value unit climatic classificati on according to iec 68 part 1 55 / 100 / 21 comparative tracking index i nsulation group iiia cti 175 maximum rated withstanding isolation vo ltage according to ul1577, t = 1 min v iso 4420 v rms tested withstanding isolation vo ltage according to ul1577, t = 1 s v iso 5300 v rms maximum transient isol ation voltage according to din en 60747-5-5 v iotm 10 000 v maximum repetitive peak isolation voltage acc ording to din en 60747-5-5 v iorm 890 v isolation resistance v io = 500 v, t amb = 25 c r io 10 12 v io = 500 v, t amb = 100 c r io 10 11 output safety power p so 400 mw input safety current i si 275 ma input safety temperature t si 175 c creepage distance dip-4 / smd-4 7mm clearance distance 7mm creepage distance dip-4, 400 mil / smd-4, 400 mil 8mm clearance distance 8mm insulation thickness dti 0.4 mm switching char acteristics parameter test condition part symbol min. typ. max. unit
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 5 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - linear operatio n (without saturation) fig. 2 - current transfer ratio (ctr) vs. temperature fig. 3 - switching operation (with saturation) fig. 4 - output characteristics (typ.) collector current vs. collector emitter voltage fig. 5 - diode forward voltage vs. forward current fig. 6 - transistor capacitance (t yp.) vs. collecto r emitter voltage isfh610a_01 r = 75 l v cc =5v i c 47 i f % 10 3 5 10 2 10 1 - 25 75 25 050 5 t a (c) isfh610a_03 i f = 10 ma, v cc = 5.0 v 1 2 3 4 i c i f isfh610a_02 1. 0 k v cc =5v 47 i f ma 30 10 20 0 015 10 5v i c v ce isfh610a_04 i f = 14 ma i f = 12 ma i f = 10 ma i f = 6 ma i f = 8 ma i f = 4 ma i f = 2 ma i f = 1 ma 1.2 v 1.1 1.0 0.9 10 -1 10 1 10 2 5 ma 55 10 0 v f i f isfh610a_05 v f = f (i f ) 25 ? 50 ? 75 ? 0 5 10 15 20 pf 10 -2 10 -1 10 0 10 1 10 2 v c v e isfh610a_06 f = 1.0 mhz c ce
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 6 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - permissible pulse handling capability forw ard current vs. pulse width fig. 8 - permissible power dissipation vs. temperature fig. 9 - permissible diode forward current vs. ambient temperature ma 5 5 10 1 5 10 2 10 3 10 4 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s i f t p isfh610a_07 t p i f t t d = t p d = 0 0.005 0.01 0.02 pulse cycle d = parameter t p i f 0.05 0.1 0.2 0.5 dc ma 0 30 60 90 120 0 50 100 75 25 ? i f t a isfh610a_08 p tot = f (t a ) mw 0 50 100 150 200 0 50 100 75 25 ? p tot t a isfh610a_09 transistor diode
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 7 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in inches (millimeters) 0.74 2.41 1.22 0.25 typ. 2.79 pin 1 identification i178027-1 6.48 6.81 4.55 4.83 0.76 1.14 4 typ . 2.67 3.30 3.81 0.51 0.89 10 0 to 15 1.32 0.84 3.30 6.35 5.84) is om ethod a 7.62 typ. i17802 9-2 0.255 (6.48) 0.268 (6.81) 0.179 (4.55) 0.190 (4.83) 0.030 (0.76) 0.045 (1.14) 4 typ. 0.052 (1.32) 10 lead coplanarity 0.004 (0.102) max. (?k?) smd iso method a 0.100 (2.54) r 0.010 (0.25) 0.070 (1.78) 0.030 (0.76) 0.315 (8.00) mi n. 0.060 (1.52) 0.435 (11.05) 0.048 (1.22) 0.105 (2.67) 0.095 (2.41) 0.033 (0.84) 0.029 (0.74) 0.150 (3.81) 0.130 (3.30) 0.098 (0.249) 0.040 (0.102) 0.010 (0.25) 0.008 (0.20) 0.296 (7.52) 0.395 (10.03) 0.375 (9.53) pin 1 identification 0.312 (7.92)
sfh610a, sfh6106 www.vishay.com vishay semiconductors rev. 2.4, 27-jun-16 8 document number: 83666 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.307 (7.8) 0.291 (7.4) 0.407 (10.36) 0.391 (9.96) option 6 0.315 (8.0) min. 0.300 (7.62) typ. 0.180 (4.6) 0.160 (4.1) 0.331 (8.4) min. 0.406 (10.3) max. 0.028 (0.7) option 7 18487 0.300 (7.62) typ. 0.150 (3.81) 0.130 (3.30) 0.472 (12.00) max. 0.365 (9.27) min. 0.020 (0.50) 0.000 (0.00) option 8
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
